The optimum geometrical ratio in halide lasers

Physics

Authors

  • M. E Aeinehvand Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran, Iran
  • S. Behrouzinia Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research School, PO Box 14399511-13, Tehran, Iran

DOI:

https://doi.org/10.14331/ijfps.2018.330110

Keywords:

Bore, Halide lasers, Length, Output power

Abstract

Some halide lasers tubes with different volume were used to investigate the geometrical dependence of the output power of laser. An optimum length-to-bore ratio of about 30 was obtained, which gives maximum average output power of halide lasers. The relationship between maximum average output power and geometrical factors of lasers were deduced and compared by than that of copper vapour lasers. So, the straightforward relation was obtained for designing of halide lasers tubes.

Downloads

Download data is not yet available.

Downloads

Published

2018-03-31

How to Cite

Aeinehvand, M. E., & Behrouzinia, S. . (2018). The optimum geometrical ratio in halide lasers: Physics. International Journal of Fundamental Physical Sciences, 8(1), 10-12. https://doi.org/10.14331/ijfps.2018.330110

Issue

Vol. 8 No. 1 (2018): IJFPS

Section

ORIGINAL ARTICLES

License

Copyright (c) 2020 International Journal of Fundamental Physical Science

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)